4013

IC 4013腳位問題！麻煩知道的大大進來教一下！

如題：我買了一顆４０１３

但…他的腳位好像跟７４系列的不一樣！

所以…我要知道各腳位是代表什麼！

麻煩說仔細一下！

謝謝！

and are the outputs of the bistable. The logic states of the outputs are always opposite. The bistable is SET when and

and RESET when and . --------------------------------------------------------------------------------The D-type has four inputs. These are: DATA input: This is connected either to a LOW voltage

logic 0

or to a HIGH voltage

logic 1.CLOCK input: The triangle

next to the CLOCK input shows that it is edge-triggered

that is

it responds to sudden changes in voltage

but not to slow changes or to steady logic levels. The CLOCK input of the 4013 D-type bistable is rising-edge triggered

meaning that it responds only to a sudden change from LOW to HIGH.Usually

the CLOCK input is connected to a subsystem which delivers pulses. To test the 4013

you will need to build an astable.SET input: The SET input is normally held LOW. When it is pulsed HIGH

the outputs of the bistable are forced immediately to the SET state

.RESET input: The RESET input is normally held LOW. When it is pulsed HIGH

the outputs of the bistable are forced immediately to the RESET state

參考資料 http://www.doctronics.co.uk/4013.htm
假如你使用在高速請看一下適不適用在來用喔。

假如不適用可以換成74的

differential clock input,serial clock input,differential clock input 已支援CLOCK input,RESET input,outputs,bistable,logic states,IC,DATA input,RESET state,HIGH voltage,logic levels

硬體|ram|核心|技嘉|cpu|硬碟|驅動程式|asus|微星|華碩|amd|nvidia|雙核心|組裝電腦|電源供應器|組電腦|ati|intel|超頻|電腦配備|

4013
參考:http://tw.knowledge.yahoo.com/question/question?qid=1406012310705如有不適當的文章於本部落格，請留言給我，將移除本文。謝謝！